Car Battery Charger Caravan and RV Battery Charger Motor Boat Battery Charger Sailing Boat Battery Charger








Share |


BC 9000 is the most powerful battery charger in BC range, ideal for the recovery, charge, desulfation, maintainance and analysis of all 12V batteries usually installed on cars and motorhomes, as well as of caravans and boats leisure batteries, starting from a capacity of 40 Ah. The device features an LCD display, digital voltmeter and dual function of battery charger and tester of the battery and the vehicle's charging system.
BC 9000 can be left always connected to the battery, with no risk and no need to disconnect the battery from the vehicle, keeping it fully charged during		  
long periods of inactivity (even months).
The charger delivers a maximum current of 9 Amps and runs a fully automatic 8-cycles charging algorithm, to recover deep discharged batteries (from 1.5 volts) and to recharge, desulphate and maintain all 12V batteries (traditional, gel, sealed...) from 40 to 120 Ah (up to 200 Ah for maintenance).
The automatic testing procedure, guided step-by-step by the instructions on the LCD display, includes an analysis of the battery State of Charge, a battery Cranking Power test and a test of the vehicle's charging system (alternator/regulator).		  
BC 9000 does not produce sparks and it is protected against short circuit, reverse polarity, overcharging and overheating.
The package includes a waterproof battery cable with eyelets (code STD2V), which can be left always installed on the vehicle, and a battery cable with insulated clamps (code 30AMPPZ). A universal 12/18 mm adapter (code ACC612V - optional) is available to recharge the battery from the cigarette lighter. The warranty is extended to 3 years.
Automatic Test Procedure:
1. Battery SOC Test at rest
2. Battery Cranking Power Test
3. Alternator/Regulator Test
TECHNICAL DATA BC 9000
Input Voltage 220÷240 Vac, 50÷60 Hz
Charge Voltage 13.8 V / 14.4 V - nominal 12 V
Charge Current 9.0 A max
Charging Algorithm 8 cycles, automatic (Initialization, Recovery,
Soft Charge, Bulk Charge, Desulfation,
Battery Analysis, Maintenance and Equalization)
Types of Batteries 12 V Lead Acid
(Traditional, Gel, MF, VRLA, AGM, etc.)
Battery Capacity From 40 Ah to 120 Ah (Charge),
up to 200 Ah (Maintenance)
Operating Temperature from 0° to +50° C

Featuring wall mounting system
with fast dismounting

DOWNLOAD
PRODUCT SHEETS
                    		 MANUALS
                    
                    		 FOLDERS
               

8 CYCLES CHARGING TECHNOLOGY
BC 9000 is a digital battery charger managed by a latest-generation microprocessor, which is in charge of monitoring the battery parameters in real time and to execute a new multi-cycle charging algorithm:
1. Initialization: the device checks if one or more cells are shorted, in order to verify that the battery is in a proper condition to be recharged/recovered.
2. Recovery: if the battery is deep discharged (battery voltage starting from 1.5 V), the device tries to recover it, taking it back to a higher voltage.
3. Soft Charge: if the battery is in a condition of significant undercharge, the device provides a light pulsing current to the battery, to overcome this critical phase.
4. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery capacity.
5. Desulfation / Absorption: the device provides a "controlled overcharge" to recover the remaining 10-15% of the battery capacity, through the desulfation/recovery the lead-acid cells (for low or medium sulfation).
6. Battery Analysis - End Cycle Test: the device stops providing current to the battery for a short time, in order to verify whether the battery is able to retain the charge received. This test is periodically repeated during the Maintenance.
7. Maintenance: the device keeps the battery in the best charge conditions for very long periods (even months) during which your vehicle is left unused, without any possible drawback (battery overcharge, battery overheating, water and/or electrolyte loss, etc).
8. Equalization: every 30 days during long term maintenance, the device executes an equalization charge in order to balance the battery lead-acid cells, avoiding electrolyte stratification within the cells.

SAFETY AND PROTECTIONS
BC 9000 features a series of 8 protections and active guard mechanisms that make it easy to install and to use, without any risks even for users without expertise:
  • No interferences the vehicle's on board electronics (control unit, ABS, GPS...)
  • Protection from output lines short circuit, even for an indefinite time: no sparks!
  • Protection from battery polarity inversion
  • Protection from battery overcharge/overheating
  • Thermal protection from overtemperature
  • No need to disconnect the battery from your vehicle
  • Very few gas development during the charge: no need to remove the battery plugs
    • Laboratory Tests ensure the manufacturing of products in conformity to the regulations in force on safety and electro-magnetic compatibility. Norms and Regulations: EN55014-1, EN55014-2, EN60335-1, EN60335-2-29, EN61000-3-2, EN61000-3-3.

    BATTERY TYPES AND CAPACITY
    BC 9000 is specifically designed for charging and maintaining all 12V lead-acid batteries currently available on the market (traditional, VRLA, MF, AGM, GEL, etc). BC 9000 is addressed to recharge batteries with a capacity from 40 to 120 Ah (up to 200 Ah for Maintenance only).

    EQUIPMENT & ADD-ONS
    The package includes:
  • the battery charger and tester BC 9000 for long term battery maintenance, provided with a 220V power cable (2 meters long) and a battery output cable;
  • STD2V waterproof battery cable with eyelets, which can be left always installed on board;
  • 30AMPPZ battery cable with clamps;
  • according to the selected kit, the universal 12/18mm cigar socket adapter (cod. ACC612V) may be included;
  • a copy of the User Manual.
    • Home  |  Company  |  Contact Us  |  Site Map