BC SMART 5000                   Car Battery Charger Motorbike & Motorcycle Battery Charger Caravan and RV Battery Charger Gardening and Lawnmower Battery Charger Motor Boat Battery Charger Sailing Boat Battery Charger

   
      
      
Share |



BC Smart 5000 is the ideal battery charger for maintaining all 12V batteries, with four modes to be selected: two specific charging programs for car and motorbike batteries (CAR and BIKE), a program designed for Start&Stop batteries and the Power Supply program for the battery replacement. It is ideal for the recovery, charging, desulfation, maintenance and analysis of all 12V batteries, and it can be left always connected to the battery, without any risks or the need to disconnect it from the vehicle, so that it can be kept always charged during long periods (even months) in which it is not used.
BC Smart 5000 has two extremely innovative features: the 12V Power Supply program allows to supply the devices on board cars and motorcycles (radio, watch…) when
 
replacing the battery, without losing the data storage. The function of automatic temperature compensation, instead, allows to give the battery the ideal charge according to the ambient temperature, thanks to an integrated sensor.
The battery charger supplies a maximum current of 1 Amp while working in BIKE mode, 5 Amp in CAR or Start&Stop modes, and it automatically executes an 8-step charging algorithm, for the recovery of highly discharged batteries (starting from 1,25 V), the charge, the desulfation and the maintenance of all 12V batteries (traditional, gel, sealed…). Its differentiated charging programs make it compatible with batteries having a capacity from 3 to 150 Ah. Moreover, it is possible to select the charging program for AGM Start&Stop batteries.
Two LEDs indicate the charging cycle which is being executed and any working anomalies; the LED bar includes a voltmeter to check the battery state of charge in real time.
The battery charger does not produce any sparks and it is protected against short circuit, polarity inversion, overcharge and overheating. The package include a waterproof cable with eyelets, to be left always installed on board vehicle and a cable with isolated clamps. A 12/18 mm universal adapter (optional) is also available, for the charge of the battery from the cigar lighter socket. Warranty is extended to 3 years.

TECHNICAL DATA BC SMART 5000
Input Voltage 220÷240 Vac, 50÷60 Hz
Charging Voltage 13.8 V / 14.4 V - nominal 12 V
Charging Current 5 A max
Charging Algorithm 8 cycles, automatic (Initialization, Recovery,
Soft Charge, Bulk Charge, Desulfation,
Battery Analysis, Maintenance and Equalization)
Types of Batteries 12 V Lead Acid
(Traditional/Wet, Gel, MF, VRLA, AGM, Ca/Ca, etc.)
Battery Capacity 3-100 Ah (Bike Mode)
15-150 Ah (Car/Start&Stop Mode)
Operating Temperature from -20° to +50°C
IP Class
Weatherproof - Protection against water
splash IP44. Suitable for outdoor use


Featuring wall mounting system
with fast dismounting

DOWNLOAD
PRODUCT SHEET
                    
MANUAL
                    

8 CYCLES CHARGING TECHNOLOGY

BC SMART 5000 is managed by a latest-generation microprocessor, which is in charge of monitoring the battery parameters in real time and to execute a new multi-cycle charging algorithm:
1. Initialization: the device checks if one or more cells are shorted, in order to verify that the battery is in a proper condition to be recharged/recovered.
2. Recovery: if the battery is deep discharged (battery voltage starting from 1.25 V), the device tries to recover it, taking it back to a higher voltage.
3. Soft Charge: if the battery is in a condition of significant undercharge, the device provides a light pulsing current to the battery, to overcome this critical phase.
4. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery capacity.
5. Desulfation / Absorption: the device provides a "controlled overcharge" to recover the remaining 10-15% of the battery capacity, through the desulfation/recovery the lead-acid cells (for low or medium sulfation).
6. Battery Analysis - End Cycle Test: the device stops providing current to the battery for a short time, in order to verify whether the battery is able to retain the charge received. This test is periodically repeated during the Maintenance.
7. Maintenance: the device keeps the battery in the best charge conditions for very long periods (even months) during which your vehicle is left unused, without any possible drawback (battery overcharge, battery overheating, water and/or electrolyte loss, etc).
8. Equalization: every 30 days during long term maintenance, the device executes an equalization charge in order to balance the battery lead-acid cells, avoiding electrolyte stratification within the cells.

SAFETY AND PROTECTIONS

BC SMART 5000 features a series of 8 protections and active guard mechanisms that make it easy to install and to use, without any risks even for users without expertise:
- No interferences the vehicle's on board electronics (control unit, ABS, GPS...)
- Protection from output lines short circuit, even for an indefinite time: no sparks!
- Protection from battery polarity inversion
- Protection from battery overcharge/overheating
- Thermal protection from overtemperature
- No need to disconnect the battery from your vehicle
- Very few gas development during the charge: no need to remove the battery plugs
Laboratory Tests ensure the manufacturing of products in conformity to the regulations in force on safety and electro-magnetic compatibility. Norms and Regulations: IEC-61000-3-2(ed.3);am1;am2, IEC-61000-3-3(ed.2) CEI-CISPR14-1(ed.5);am1;am2, CEI-CISPR14-2(ed.1);am1;am2, IEC60335-1(ed.5), IEC-60335-2-29(ed.4);am1;am2.

BATTERY TYPES AND CAPACITY

BC SMART 5000 is specifically designed for charging and maintaining all 12V lead-acid batteries currently available on the market (traditional, VRLA, MF, AGM, GEL, Ca/Ca, etc). BC SMART 5000 is addressed to recharge and maintain batteries with a capacity from 3 to 150 Ah (starting from 15 Ah with Car Mode and Start&Stop Mode).

EQUIPMENT & ADD-ONS

The package includes:
- the battery charger BC SMART 5000 for long term battery maintenance, provided with a 220V power cable (2 meters long) and a battery output cable;
- waterproof battery cable with eyelets, which can be left always installed on board;
- battery cable with clamps;
- according to the selected kit, the universal 12/18mm cigar socket adapter may be included;
- a copy of the User Manual.
Home  |  Company  |  Contact Us  |  Site Map  
CUSTOMER REVIEWS
Martin - Spain - 28.05.2015

Good product. I had another charger that broke, so I bought this charger and ther's no comparison. It charges much more and I also tried it on two batteries that seemed completely descharged and it recovered them. Great! I really reccomend it. For me it's an 11 out of 10.