|
|
|
|
| |
FEATURES
Automatic with Microprocessor, 4 Charging Cycle:
Initialization, Soft Charge, Bulk Charge
and Maintenance.
Couple of green/red LEDs to indicate:
- charging cycle executed (green LED);
- any occurring anomalies (red LED).
For all 12V lead-acid batteries (traditional, Gel, MF, AGM, VRLA...) from 1.2 to 60 Ah.
3 years warranty. |
 |
|
 |
|
FUNCTIONING
Green LED: it slowly winks during the Charge Cycles (Soft & Bulk), it’s fixedly on during the Maintenance Cycle.
Red LED: it turns on in case of anomalies (220V Input Power missing, battery not connected, battery polarity inversion or short circuit). |
|
|
CHARGING TECHNOLOGY
BC Easy 900 is managed by a latest-generation microprocessor, which is in charge of monitoring the battery parameters in real time and to execute a new multi-cycle charging algorithm:
1. Initialization: the device verifies if one or more battery cells are shorted, i.e. that the battery is in a proper condition to be recharged.
2. Soft Charge: if the previous step recognized a state of significant undercharge, the device provides a light pulsing current to the battery, to overcome the critical phase.
3. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery overall capacity.
4. Maintenance: the device keeps the Battery in the best charge conditions for very long periods (even months) during which your vehicle is left unused, without any possible drawback (battery overcharge, battery overheating, water and/or electrolyte loss, etc).
SAFETY AND PROTECTIONS
BC Easy 900 features a series of 8 protections and active guard mechanisms that make it easy to install and to use, without any risks even for users without expertise:
No interferences the vehicle's on board electronics (control unit, ABS, GPS...)
Protection from output lines short circuit, even for an indefinite time: no sparks!
Protection from battery polarity inversion
Protection from battery overcharge/overheating
Thermal protection from overtemperature
No need to disconnect the battery from your vehicle
Very few gas development during the charge: no need to remove the battery plugs
Laboratory Tests ensure the manufacturing of products in conformity to the regulations in force on safety and electro-magnetic compatibility. Norms and Regulations: EN55014-1, EN55014-2, EN60335-1, EN60335-2-29, EN61000-3-2, EN61000-3-3.
BATTERY TYPES AND CAPACITY
BC Easy 900 is specifically designed for charging and maintaining all 12V lead-acid batteries currently available on the market (traditional, VRLA, MF, AGM, GEL, etc). BC Easy 900 is addressed to recharge batteries ranging in 1.2 .. 45 Ah capacity (up to 60 Ah for Maintenance only).
TECHNICAL DATA
| PRODUCT |
BC Junior 900 |
| Input Voltage |
220÷240 Vac, 50÷60 Hz |
| Charge Voltage |
13.8 V - nominal 12 V |
| Charge Current |
0.9 A max |
| Charging Algorithm |
4 cycles, automatic
(Initialization, Soft Charge,
Bulk Charge and Maintenance) |
| Types of Batteries |
12 V Lead Acid
(Traditional, Gel, MF, VRLA, AGM, etc.) |
| Battery Capacity |
From 1.2 Ah to 45 Ah (Charge),
up to 60 Ah (Maintenance) |
| Dimensions: |
| Product (mm) |
105x58x50 |
| Package (mm) |
180x215x63 |
| Operating Temperature |
from -20° to +50° C |
EQUIPMENT AND ACCESSORIES
The package includes:
BC Easy 900 battery charger, provided with a 220V power cable (2 meters long) and a battery output cable;
A waterproof battery cable with eyelets, which can be left always installed on board;
A battery cable with clamps;
according to the selected kit, a universal 12/18mm cigar socket adapter may be included;
a copy of the User's Manual.
| |
|
| |
|
IT | 
UK | 
DE | 
FR | 
CH | 
AT | 
BE | 
NL | 
ES | 
PT | 
FL | 
PL | 
GR 
All the Battery Chargers and Accessories BC Battery Controller are developed and manufactured by Forelettronica srl. BC Battery Controller is a Registered Trademark.