|
|
|
|
| |
FEATURES
Automatic with 2 Charging Cycle:
Charge and Maintenance.
It recognizes automatically the Battery (6/12V)
Couple of green/yellow LEDs to indicate:
- charging cycle executed (yellow LED);
- connection to 220V (green LED).
For all 6/12V lead-acid batteries (traditional, Gel, MF, AGM, VRLA...) from 1.2 to 60 Ah.
3 years warranty. |
 |
|
 |
|
FUNCTIONING
Green LED: it gets on as soon as the battery charger is plugged into the 220V power outlet. It has to be always on.
Yellow LED: it winks during the Charge Cycle, it's fixedly on during the Maintenance Cycle. In case of functioning anomalies (battery not connected, polarity inversion, short circuit) it remains off. |
|
|
CHARGING TECHNOLOGY
BC K500 is an automatic battery charger and maintainer. It recognizes automatically the battery voltage (6/12V) and executes a 2-steps charging algorithm:
1. Charge: the device provides full current to the battery, until it is fully charged.
2. Maintenance: the device keeps the battery in the best charge conditions for very long periods (even months) during which your vehicle is left unused, without any possible drawback (battery overcharge, battery overheating, water and/or electrolyte loss, etc).
SAFETY AND PROTECTIONS
BC K500 features a series of 8 protections and active guard mechanisms that make it easy to install and to use, without any risks even for users without expertise:
No interferences the vehicle's on board electronics (control unit, ABS, GPS...)
Protection from output lines short circuit, even for an indefinite time: no sparks!
Protection from battery polarity inversion
Protection from battery overcharge/overheating
Thermal protection from overtemperature
No need to disconnect the battery from your vehicle
Very few gas development during the charge: no need to remove the battery plugs
Laboratory Tests ensure the manufacturing of products in conformity to the regulations in force on safety and electro-magnetic compatibility. Norms and Regulations: EN55014-1, EN55014-2, EN60335-1, EN60335-2-29, EN61000-3-2, EN61000-3-3.
BATTERY TYPES AND CAPACITY
BC K500 is specifically designed for charging and maintaining all 6/12V lead-acid batteries currently available on the market (traditional, VRLA, MF, AGM, GEL, etc). BC K500 is addressed to recharge batteries ranging in 1.2 .. 30 Ah capacity (up to 60 Ah for Maintenance only).
TECHNICAL DATA
| PRODUCT |
BC K500 |
| Input Voltage |
220÷240 Vac, 50÷60 Hz |
| Charge Voltage |
6,8 V - nominal 6 V / 13.8 V - nominal 12 V |
| Charge Current |
0.5 A max |
| Charging Algorithm |
2 cycles, automatic
(Charge and Maintenance) |
| Types of Batteries |
6/12 V Lead Acid
(Traditional, Gel, MF, VRLA, AGM, etc.) |
| Battery Capacity |
From 1.2 Ah to 30 Ah (Charge),
up to 60 Ah (Maintenance) |
| Dimensions: |
| Product (mm) |
85x70x56 |
| Package (mm) |
110x110x160 |
| Operating Temperature |
from -20° to +50° C |
EQUIPMENT AND ACCESSORIES
The package includes:
BC K500 battery charger, provided with a 220V power cable (2 meters long) and a battery output cable;
STD2V waterproof battery cable with eyelets, which can be left always installed on board;
according to the selected kit, a battery cable with clamps (cod. 30AMPPZ) and a universal 12/18mm cigar socket adapter (cod. ACC612V) may be included;
a copy of the User's Manual.
| |
|
| |
|
IT | 
UK | 
DE | 
FR | 
CH | 
AT | 
BE | 
NL | 
ES | 
PT | 
FL | 
PL | 
GR 
All the Battery Chargers and Accessories BC Battery Controller are developed and manufactured by Forelettronica srl. BC Battery Controller is a Registered Trademark.