BC Plus 900 is a digital battery charger: it is managed by a latest-generation microprocessor, which is in charge of monitoring the battery parameters in real time and to execute a new multi-cycle charging algorithm:
1. Initialization: the device checks if one or more cells are shorted, in order to verify that the battery is in a proper condition to be recharged/recovered.
2. Recovery: if the battery is deep discharged (battery voltage starting from 1.5 V), the device tries to recover it, taking it back to a higher voltage. 3. Soft Charge: if the battery is in a condition of significant undercharge, the device provides a light pulsing current to the battery, to overcome this critical phase.
4. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery capacity.
5. Desulfation / Absorption: the device provides a "controlled overcharge" to recover the remaining 10-15% of the battery capacity, through the desulfation/recovery the lead-acid cells (for low or medium sulfation).
6. Battery Analysis - End Cycle Test: the device stops providing current to the battery for a short time, in order to verify whether the battery is able to retain the charge received. This test is periodically repeated during the Maintenance.
7. Maintenance: the device keeps the battery in the best charge conditions for very long periods (even months) during which your vehicle is left unused, without any possible drawback (battery overcharge, battery overheating, water and/or electrolyte loss, etc).
8. Equalization: every 30 days during long term maintenance, the device executes an equalization charge in order to balance the battery lead-acid cells, avoiding electrolyte stratification within the cells.

BC Plus 900 features a series of 8 protections and active guard mechanisms that make it easy to install and to use, without any risks even for users without expertise:

No interferences the vehicle's on board electronics (control unit, ABS, GPS...)

Protection from output lines short circuit, even for an indefinite time: no sparks!

Protection from battery polarity inversion

Protection from battery overcharge/overheating

Thermal protection from overtemperature

No need to disconnect the battery from your vehicle

Very few gas development during the charge: no need to remove the battery plugs

Laboratory Tests ensure the manufacturing of products in conformity to the regulations in force on safety and electro-magnetic compatibility. Norms and Regulations: EN55014-1, EN55014-2, EN60335-1, EN60335-2-29, EN61000-3-2, EN61000-3-3.

BC Plus 900 is specifically designed for charging and maintaining all 12V lead-acid batteries currently available on the market (traditional, VRLA, MF, AGM, GEL, etc). BC Plus 1500 is addressed to recharge batteries ranging in 1.2 .. 45 Ah capacity (up to 60 Ah for Maintenance only).

The package includes:

BC Plus 900 battery charger, provided with a 220V power cable (2 meters long) and a battery output cable;

STD2V waterproof battery cable with eyelets, which can be left always installed on board;

30AMPPZ battery cable with clamps;

according to the selected kit, the universal 12/18mm cigar socket adapter (cod. ACC612V) may be included;

a copy of the User's Manual.